So ya wanna make soap with me?

 PSSSST...I'm no longer blogging here!
You can now find me at


EDITED:  I'm a dolt....I've had several emails asking about my soap.  YES I do sell it.  I shoulda put that in there.  Why else would I need 96 bars of soap?  Here's the website:

The marathon has begun!  I got four 2# batches made last night, with 4 more to whip up tonight....then 3 more the following evening.  Whew!  Each batch makes a log 'o soap that becomes 8 big bars of homemade, bubbly goodness.  That's 96 bars ready for action in about 2 weeks.

I know this is a decorating-ish blog mostly, but let's count this as a craft, shall we?  I've taken pics through-out the process, and will try to explain each step for anyone interested in trying to make their own soapy soap.  It's not hard....in fact, it's a lot like cooking in that you must measure ingredients, combine certain ingredients with others in a certain order, and be aware of the finicky-ness of natural ingredients.

Disclaimer:  Making soap is basically just mixing a lye solution into melted fats, pouring into a mold and letting it harden and cure.  There are about a hundred ways to make soap (just like there's a hundred ways to make, say, macaroni and cheese).  This is just the way I do it. The method I'm illustrating below is for Cold Process, Oven Gelled. I actually prefer non-gelled soaps, but those take 6 weeks to cure, and I need them before that. I will provide links to other soap making sites at the end of this post.  Aren't I nice?

Clean the kitchen first!  You want an empty sink to catch used bowls and such, and as much uncluttered counterspace as you can get. I fill half my sink with cool soapy water so I can immediately dunk used lye containers and raw soap lined pans.  (Raw soap is still caustic).

You need a good couple hours of your time uninterrupted.

I make soap in my secret lab, otherwise known as my kitchen.  I also use highly specialized equipment....otherwise known as my pyrex measuring cups, pots, whisks, spoons etc.

Here's what you need (descriptions below images):
  • A container (heavy glass such as pyrex, canning jars, or stainless pitcher....no aluminum)
  • Something to stir the solution (I use ice tea spoons cause they have a long handle.)
  • Thermometer (not completely necessary)
  • Scale (even a cheap digital scale from the cooking section at Walmart will do...a 'tare' option is helpful)
  • Goggles (old clothes and/or an apron are helpful)
  • Large whisk, spatula/large spoon, stickblender (optional, but makes things move along much faster...get one for $10 at the typical big box store, nothing fancy)
  • Paper plates

You'll also need something to use as a mold.  For beginners, just about any rectangular-shaped box will work.  Try a small shoe box lined with freezer paper or a plastic box for cold food storage, which won't need a liner.  The size will depend on the size of the batch.  I use the wooden IKEA organizer above, and each drawer holds a 2# batch.

Don't forget your recipe and instructions, info/ingredients for the specific batch(es) you plan to make, something to write with and scratch paper (helpful for me to note how a particular batch responds to the essential oils, temperatures, etc. for my future reference.)

I'll get to the other stuff in the pictures later.  Some of it is unnecessary unless you plan to make lots of soap on a continuing basis.

  • Glass of soda pop, bag of chips or cookies for the soapmaker (optional)
  • Oils and butters
  • Essential Oils or Fragrance Oils (optional)
  • Lye 
  • Optional additives (citric acid, silk fibers, clay, herbs, seeds, etc.)
Grab your goggles! Let's get making soap!

I always begin by preparing the lye solution. Once that lye hits the cold water, it heats up high and fast and will need time to cool before adding it to the melted fats.

BTW, Lye is getting harder to find locally due to the fact that it is also a major ingredient in Meth production. :(  I can still find it at small hardware stores, but usually order it from a soap supplier online. (Again, I will provide links at the end.)

Lye is also extremely caustic...meaning it will burn if even a small bead/crystal gets on your skin.  Some soapmakers wear gloves, but I don't.  If I feel the tell-tale itchy tingle, I just run my hands under very cold water.  I also keep a wet cloth nearby to wipe up any stray lye beads/crystals on the counter.  Wipe and rinse cloth out in cold water immediately. No need to freak out, just respect this powerful chemical and don't use it when kids or pets are around. Always put the lid back on as soon as you pour some out to weigh.

Also worth mentioning is that there is no free lye in a finished bar of soap if you've measured correctly....it's like baking a cake:  though you mix raw eggs, flour and so-forth to make the batter, when you take a bite of the finished yummy-ness you don't bite into an egg.  The chemical reaction between the ingredients and heat produce a new compound of moist cake.  It's the same with soap.....lye and fat mix to become soap (which is technically two compounds: glycerine and salt.  And you cannot make soap from scratch without lye.  Period.

See?  It looks like course salt.  It's full of static too, especially in cold months, so keep that wet rag handy. Oh, and I put my scale inside a big ziplock to protect it from all the inevitable spills.)

Getting ready to add the measured lye into my cold water with my optional additives added (citric acid, clay, silk fibers), which is why it's not completely clear:

Goggles on!  Begin gently pouring the lye into the water...I have my exhaust fan on, standing back as far as I can while still being able to pour and stir.  The fumes are VERY strong and toxic.
Stir, stir, stir....til the water becomes clear again (mine doesn't because it has the additives).

See that? This is why I use a long handled ice tea spoon....the temperature reaches almost 200 degrees within 30 seconds of adding the lye to the water.  Lots of wicked hot steam which you do not want to touch or breathe.  Stir gently!
Once clear, I set my lye solution aside to cool.  Last night, I actually set it out on the back porch so it would cool faster.  Took maybe half an hour I think.

In the meantime, I prepare my oils and butters.
One of the oils I use is HARD and impossible to get out of the jug, so I set it on a trivet in boiling water to liquify it.

I sometimes use Shea Butter as a luxury ingredient, and it also needs melted, though I just measure out the little bit I need and put it directly in a small pan on low heat.

 These are the essential oil blends I'm using for these batches.  The small jars are 2 oz ea and fragrance a 2# batch rather nicely.  Some only use 1.5 oz for a 2# batch....just depends on how strongly you want them to smell.
These are BY FAR the pricey-est part of soap-making.  Fragrance oils are a bit cheaper (at least where I order), depending on the quality, but I prefer all natural....so I invest in the essential oils.

If you use botanicals, it helps to soak them in the fragrance/essential oil for a bit...helps the soap retain it's scent longer.

This is fresh dill soaking in the eucalyptus spearmint essential oil blend.

Weighing out the liquid and melted oils.
I use a glass bowl to weigh the individual oils, then dump them into a pot, along with the fragrance oil.

One last thing to do while lye is cooling and oils are melting....prepare the molds.  In my case, that means lining them with freezer paper, shiny side up.
There's no right way to do this, but I'll post a link to a step by step tutorial in the links section below.  

At this point, check the temperature of the lye and oils.  Traditionally each should be around 120 degrees, but thru the years, I've gotten to the point where I like them both room temp (so long as the hard oils will stay liquified.)  Because my lye was outside, it was COLD, and my oils were just warm...as in I could put my hand on the side of the pan and feel warmth similar to a mug of just right cocoa for a little person.

Next, since I'm using the oven to jump-start the gelling process, I set the temp to 170 degrees.

Now we're ready to roll.  Make sure everything you need is within reach because once the lye hits the oils, the chemical party begins!

I set my whisk, stickblender and spatula on a paper plate to the left of my pot of oils.  The mold sits to the right.  Here goes...


Pour the lye in a slow steady stream into the pot of oils, gently stirring with the spatula.

Switch to your whisk and begin doing the pancake batter whip, being careful not to splash.....you're basically trying to get the ingredients to mingling nicely so as to begin the chemical reaction.
It will still be thin at this point, and shiny on top.

The reaction between the lye and oils produce heat, and the heat will thicken the raw soap mixture.  This is called 'bringing it to trace'. Depending on the temps of the lye and oils, the types of oils used, and the fragrance/essential oil, the time it takes to thicken to a trace (pancake batter or thin pudding consistency) will vary. When it gets to 'trace'....you pour into the mold.

Trace can be tricky and can take a long time, and generally I switch to a stickblender...which is like whisking on steroids.  If you start with higher temps, and you're using a mint or floral essential/fragrance oil, don't be surprised to see soap on a stick(blender). That's called a seize. It solidifies before your very eyes, and you have to beat it into submission or even throw the whole batch out.....this is why I like to use cooler temps, and only use the stickblender for short bursts of like 10-15 seconds at a time until I can see how fast the soap is thickening.  If the raw soap starts tracing too quickly, switch back to the whisk to 'stir it down'.  The goal is having a pourable batter to flow into the mold.  I tried to take some pictures of this process....
Switching to the stickblender....very thin consistency.

Stick blender submersed, and blending on low speed.

It's turning more opaque, but still thin.  There's no longer a shiny surface. I call this 'emulsified', but not traced.
Can you see the drip?  I check for trace by evaluating the 'drip'.  If it slips back into the batter, keep blending.  When it drips onto the surface of the batter and stays in a little mound for a couple seconds (literally, like, 2 seconds) before disappearing....that's early trace.  Some folks will wait to add the fragrance/essential oils and superfat (don't ask) at this point, and it's also when people who use colorants separate out some batter and make pretty designs.  That would not be me.

So I continue to blend in short bursts or use the whisk till it actually leaves a definable 'tracing' on the surface.  Then pour into your mold.
See how the batter drips off the whisk and leaves mounds?  This is perfectly traced soap.

I let it sit for a couple minutes to let it thicken a bit more so I can put a design on top like this:
Back and forth, back and forth down the length of the log surface. 
Notice the tracing is heavy and the pattern doesn't sink in anymore.  If you wait until the raw soap is this consistency in the pot/bowl, it will be harder to pour into the mold.

I pop them into the oven, and check them after about 20 minutes or so. 

You're looking for signs of gelling, can you see it below?
It's getting darker around the edges and at the top of the designs:

That's caused by the heat being generated by the chemical reaction between lye molecules and oil molecules.
This log is gelling along one side.  At this point, I watch the soap carefully, checking every 5 minutes or so until the whole surface is gelled. 

Unfortunately, I went to check the blogs and the soap almost overheated...
It literally started crawling out of the mold.  The surface got bubbly too. Nothing wrong with the soap, just not cosmetically perfect....But it doesn't have to be perfect to be beautiful, eh Nester?
This is why I don't like gelling soap...you have to babysit it.  Even if you don't use the oven to jump-start the gel and instead cover and insulate with towels, it needs to be checked and it's hard for me to get consistent results.  Some soapers swear by the method.  To each his own.  It's nice to be familiar with all the methods, though. When I don't gel, it's as simple as pouring room temp batter into molds and walking away for 3 days.  Unmold, slice and let cure 6 weeks.

Anyway, once the entire surface is gelled, take it out and let it cool on the counter till cool (generally 8-12 hours).

Then you can take it out of the mold and freezer paper.  You can see the chinese takeout fold on the end:
Tada!  Block o' soap.

This particular batch was a lavender vanilla blend....any soap made with vanilla will eventually turn very dark brown as it is exposed to the air.  You can see it happening on top already.  Eventually the log will be completely deep chocolate brown.  Which is weird, since ya'd think vanilla would be white.  Just the quirks of using natural ingredients. The middle is rosemary peppermint and stays snowy white.  The eucalyptus spearmint with dill wasn't behaving, so it went back into the oven during this shot.

I let the logs sit out on a rack for a week or so, then slice them up into bars to finish drying out and curing.  Because these are gelled, they are ready to use in 2 weeks time....though the longer they sit, the harder they become and longer they will last.  I try to let them air out and cure for a total of 4 weeks when possible.
Non-gelled soaps need at least 6 weeks to harden and cure.

Here are useful links if you'd like to undertake soapmaking at home.  I'm also available to coach you thru via email, or even to clarify this post....which was way too long and rambly. :)

So there ya have it.  Even with the bubbly textured tops, they are beautiful in their simplicity, no?
Partying with:
Twice Remembered: Make Your Monday
Today's Creative Blog: Get Your Craft On
A Soft Place to Land: DIY Day


Deb said...

Great post! I always wanted to know the soap making process. You make it sound easy but it looks complicated to my simple brain!

gail@My Repurposed Life said...

I just typed a big ole comment, and it didn't post! ugh!
I will never make soap, but loved your tutorial. Scale in the baggy, genious! Your soap looks good enough to eat!
I'm bushed! worked hard all day! The grand-dog got all muddy while I was working on the mantel, gotta give him a bath! :(

A Pretty Pastime said...

Oh Cindy...those are some beautiful soap logs. I adore the design on top (almost looks like a meringue :-) I always tell people making soap is alot like making a cake-just a lot more caustic. I love your tutorial-it's great and I am always looking for new links (you know because I don't spend enough time on the computer already :-)

Thanks for taking the time to post this ~ it's great!


Old Time Cindy said...

Thanks Cindy! Learning to make soap is on my to do list. I've been saving some fave links and will include your tutorial. It's a little nerve wracking the first time, but everyone says that after your first batch you always wonder why you waited so long.
Future soap maker at Lakewood,

Glenda/MidSouth said...

Thanks for sharing the tutorial. I'm sure I won't every make soap (thought about it a while ago), but I feel sure many appreciate your taking the time to educate them.
Have a great week.

Anonymous said...

wow.. I've made soap before.. with organic supplies.. but wow, what a job you did.. are they for sale?? Oh, and they look so fab my dear.. just fab. I love it.

Thank you for the step by step process as it helps a lot.

with love,


Amy@TheLemonCottage said...

You made me want to make soap.
Will you come to my house for the first batch? Ya know, you could do it, I would watch. :)
Thanks for sharing this.
I've never seen a tutorial for soap making.

Kate said...

Amazing tutorial!!!! You are uber cool girl!!!
Thanks for the sweet notes you leave on my bloggy they make me smile. Ok just for you a cyber tour in the future.

Have an amazing week

Junk Exchange said...

great post ... i love how you begin with 'basically just' ..

to borrow a phrase from one of my favorite movies ... 'you'll put your eye out, kid' ..

i love homemade lye soap though .. really not fond of the glycerin .. but i would rather purchase it from someone like you who knows what they are doing ... so you sell? / wholesale?


DustyLu said...

Amazing. I stick to buying it from you instead. lol thats alot of work. so clever..lulu

Unknown said...

I just emailed you my order! But I love that you did a tutorial. I have always wanted to try making soap and I think you just convinced to do it some day! It looks time consuming and messy but also something it would be fun to say 'I did it!'. Awesome!

www.thewhitefarmhouse2.blogspot.com said...

Well, that is quite the undertaking. I think the easiest way to get homemade soap is to just order it from you. Much simpler for this lazy girl!!

Unknown said...

Wow, great tutorial. I would love to try it, but it sounds easier to buy it from you! Thanks for sharing- Krista

Captain's Wife - Jennifer said...

Gorgeous soaps! I recently did some melt & pour...now I am thinking this type would be neat to make. Thanks for the tute! :)

The Wired Angel said...

This is so terrific and I'll have to come back when I don't have three people (adults and children) pulling me in three different directions! Thanks so much for sharing your knowledge and talent! Hugs, Peggy

GardenOfDaisies said...

Wow! I had no idea what it took to make soap. What a wonderful tutorial!

Heidi said...

I'd just like to say that I'm a HORRIBLE baker, b/c I have problems with measuring, following directions, etc. I can guarantee that I will NEVER make homeade soap in my lifetime. YOU have the patience of a saint! AND, that was seriously fascinating to read/see how it is done, kudos to you for being way more awesome than I could ever dream of being! I bet your house smells delish when you are whippin these bad boys up!

Funky Junk Interiors said...

That was awesome! And I've been enjoying the bar from your neck'o the woods very much! Love the fragrance to use. :)


Recaptured Charm said...

WOW.. how impressive! They look WONDERFUL. You definitely made a complicated process look easy.
They really are lovely!

Michelle, All Home and Love said...

Great tutorial, thank you for taking the time to write that all out! Those bars of soap look so pretty.
Thank you also for your kind words on Casey's passing, I appreciate it.

Sandra said...

Terrific tutorial...I have wanted to make my own soap for years but it seems so intimidating...this really does help explain the process. Gonna have to give it a try now.

Seawashed said...

That is just too hard for me. And I'm afraid of lye!

Erika said...

Oh wow they look fantastic, (and also look like some sort of yummy cakes). You make me wanna try making soup...really! :D:D:D
But it is a game of patience, isn't it? hahaha
Hugs, Erika

Barbara Matson said...

The soap looks good enough to eat. I doubt I will ever have time to make soap but when I do I will use your tutorial. You make it look easy. I'm impressed!


Prior said...

Great step by step... It looks good enough to eat! Lezlee

ain't for city gals said...

Oh my...what a lot of work..I still might give it a try though....thank you

Lou Cinda @ Tattered Hydrangeas said...

These ARE beautiful! I bet they smell amazing! I am all about aromas!

I am going to check out your soap shop!

Lou Cinda

Jamie said...

Wow! The soap looks beautiful! I don't think I will ever try making it myself so, I think you're pretty amazing!

Thanks for your comment on my blog. I'm so glad you like my bedroom. And, of course, you can use a picture. Thanks for asking! :)

Kendall@ Finesse Your Nest said...

Uh....and she makes soap TOO?!?! Wow, Cindy you amaze me. Can you send some of your energy to Texas?!


Related Posts with Thumbnails